[F500] Red Devil front suspension

[Brannon, Greg]

Bill,

Give Don a call at Red Devil.  406-494-8245.  He can help you out.



-----Original Message-----
From: f500-bounces+gbrannon=national.aaa.com at f500.org
[mailto:f500-bounces+gbrannon=national.aaa.com at f500.org] On Behalf Of
Jan Schmidt
Sent: Tuesday, July 06, 2004 2:44 PM
To: f500 at f500.org
Subject: [F500] Red Devil front suspension


I need a little Devil help here. My beat up old Red devil (1988) has its
lower front A arm attached strangely. The arms go through a big rod (to
pivot on) and the rod goes through two tubes, one at each end. The tubes
are welded to a tab, with a bolt welded into it, which in turn, bolts
into the frame. I can take the upper arm off, by unbolting, but the
lower arm has its tabs welded to the frame, as well as being bolted to
the frame. My question is "Do the tabs need to be welded to the frame
for stability, or is this something a little crazy that a previous owner
did."  The upper arms unbolt very easily, but not the lowers (but then
again, the lowers actuate the "shocks", with their movements) Bill
Schmidt 88 Red Devil Kawi F440
_______________________________________________
F500 mailing list - F500 at f500.org
To unsubscribe or change options please visit:
http://f500.org/mailman/listinfo/f500
*** Please, DO NOT send unsubscribe requests to the mailing list! ***